Low Sulfur Foundry Coke/hard coke/Blast Furnace Coke for Casting
Introduction :
Foundry coke is widely used in iron making because of its special physical and chemical characteristics. It's the main cupola molten iron fuel, foundry coke plays an importent role in melting furnace charge and overheat the molten iron, support stock column, maintain good air permeability .Therfore, foundry coke with large block size, low sulfur ,low reactivity, small porosity with sufficient impact crushing strength is popular in the international markets.
Application:
1) Used for steel making,can improve the Carbon content in steel-melting and Ductile iron foundry.
2) Mainly used in steelmaking in electrical stove, screening water, shipbuilding sandblast to remove rust.
3) Can reduce the cost of steelmaking effectively by replacing the traditional petroleum coke of carburant.
Specification:
Foundry Coke
Grade |
Chemicals Composition(%) |
| Fixed Carbon |
Ash |
V.M |
Sulphur |
Phosphor |
Moisture |
| Min |
Max |
| Special Grade Standard |
90% |
8.0% |
1.5% |
0.6% |
0.03% |
5.0% |
| First Grade Standard |
88% |
10.0% |
1.5% |
0.6% |
0.03% |
5.0% |
| Second Grade Standard |
86% |
12.5% |
1.5% |
0.7% |
0.03% |
6.0% |
| Size |
60-90mm,80-120mm, 120-300mm,80-120mm,90-150mm,150-300mm(90% Minor) as your requirement |
Package:
A. 1ton Jumbo Bag, 18tons/20'Container
B. Bulk in Container, 20-21tons/20'Container
C. As customers' request
Delivery Detail: within 5-7 days after the confirmed order.
Storage conditions:The product should be stored in a clean, dry warehouse, to prevent moisture and contamination.
Factory Profile:
We is a professional large -scale manufacturer of all types of abrasive materials and integrating development and production together and we have more than 15years experience. We have professional production and R&D departments, as well as dedicated marketers. We have more than 5 years of production and sales experience, And export our product to all over the world . We often export to South Korea, India, Singapore, Vietnam, Thailand, Malaysia . Our quality and service have received praise from many customers and established long-term cooperation.
FAQ:
Q: What's the MOQ?
A: Our MOQ is 1 metric ton. The price will be a lillte higher if the quantity is less than 1 metric ton.
Q: What's the delivery time?
A: It will takes about 7 days. But the exact time is according to actual situation.
Q: Can I get free samples?
A: Yes, we will mail samples you requested ASAP.
Q: Which products suit us?
A: We will recommend products to you based on your application or You can place a trial order upon satisfactory test of samples.
Audited Supplier 
){kind=link}